Installing the Station

Wall mounting

  1. Drill two holes in the wall referencing the distance shown in the image below.

    • Recommended screw height: lower than 3 meters.

  2. Drive in two screws referring to the diameter below. Do not fully insert the screws.

    • Screw head diameter: between 3.3 and 6 mm

    • Screw rod diameter: smaller than 3.3 mm

  3. Hang the ASTROS Station onto the two screw heads and slide it downwards until it is securely fixed.

Connecting cables

  1. Connect the Station to a display using an HDMI or VGA cable. If the display supports touch, also connect a USB cable.

  2. Connect the Station to an Ethernet cable.

  3. Connect the power adapter. The Station will power on automatically without the need to press any buttons.

  4. (Optional) Connect a mouse to the Station.

Last updated